Hanover Supply, furnace maintenance tips

Furnace Maintenance Tips To Ensure a Warm Winter This Year

December 17 2021

With fall almost over, cooler temperatures are here to stay. As the weather cools, it’s essential to get your furnace in good shape.

Here are some helpful furnace maintenance tips for ensuring your furnace provides you with constant warmth this year.

Inspect for Air Leaks

Air leaks will compromise the heating of your home, causing your furnace to work overtime. Blown fuses or tripped circuit breakers can be signs of an air leak, so keep an eye out for these indicators.

Seal off any air leaks by looking over your furnace and its vents, especially after recent wind storms. If you notice loose material around the venting system, apply exterior caulk to ensure air cannot escape through these openings.

Keep the Vents Clear

The air vents in your home should be regularly maintained to ensure a steady flow of conditioned air into the room. Dust and dirt can accumulate around the venting system, so remove this material regularly. You can use a soft brush or vacuum attachment to clean away any grime accumulated in these areas.

Check the Flame Sensor

The flame sensor is an important part of your furnace, as it acts to regulate gas. It can be a lifesaver during a power outage, but it may need some adjustments every once in a while. If this part of the system is out of adjustment or becomes faulty, you should contact a professional to inspect and repair it.

Inspect Indoor and Outdoor Filtration

Knowing what your filters look like is essential to understanding when it’s time to replace them. You have two choices for the filters in your furnace, one for the inside and one for the outside. Replacing them pre-maturely can cause the furnace to overwork, which leads to additional wear and tear.

Be sure to check both of these when you’re doing an inspection, as they may need replacement.

Change Filters According to Manufacturer’s Recommendation

Due to varying recommendations based on model or age, it is important that you read any instructions included with your furnace to understand how often you should change your filter. If the filter is not changed as recommended, it can become blocked and cause the furnace to overheat or even break entirely.

Maintain Proper Humidity Levels in Home

By keeping proper humidity levels in your home, you reduce the need for heating and cooling systems to work harder than they need to. Ensure you maintain adequate humidity levels by running your humidifier through the winter months, as it can help reduce your energy costs throughout the year.

Tune-Up Your Furnace Regularly

Tuning up your furnace is an integral part of ensuring that your appliance works appropriately all year long. This involves checking all the parts and components of the furnace to ensure they are properly lubricated and in working order.

If you do not know how to tune up your appliance, consider hiring a professional service technician who can come out and ensure everything is running smoothly during the colder months.

Reset Thermostat

If you find your home is not warm enough while using the thermostat, it may be time for a reset. This ensures the temperature setting on the furnace matches what has been set on the thermostat, ensuring your home is at the desired temperature when you arrive home and turn it on.

Have an Energy Audit Done on Your Home

If you find that your heating system is inefficient, it may be time to have an energy audit done on your home. This will allow you to properly identify where the most heat loss occurs and help decrease energy consumption throughout the year.

During this inspection, a professional service technician will examine insulation, windows, and heating systems to ensure they are working properly.

Check the Control Valve

A control valve helps regulate the flow of warm air throughout your home. This can become clogged with dust, preventing it from operating at optimal levels. Take time to clean out the valve on both sides to ensure proper airflow through your furnace.

Clean the Drainage Tube

The drainage tube is a part of the water system that collects condensation from your unit, preventing it from entering your home. Over time, debris can collect in the tube and clog it up, causing water to back up into your home. Check this pipe for any debris buildup and clean it out if necessary.

Inspect Furnace for Rusting Parts

If your furnace is beginning to rust, it may be time to replace it. This can lead to issues with the system, including failure of certain components and reduced efficiency. You must check this regularly, so repairs can be made before they become big problems.

Although regular maintenance of your furnace will ensure that your home is warm during the colder months, you must know when to hire a professional service technician. If your furnace isn’t working properly, call a skilled technician for repairs or replacement as needed.

Upgrade Your Furnace When Needed

Upgrading a furnace can be a great way to increase efficiency and reduce the impact on your home. If you live in an area where temperatures drop below zero regularly, upgrading to a sealed-combustion furnace can help ensure the system starts up and provides heating even during cold weather conditions.

Ensure Regular Inspections by a Professional Technician

Hiring a professional service technician to ensure your furnace is working properly can help you avoid a costly repair bill down the road. By hiring an experienced service technician, you will know what’s going on with your furnace at all times and can make any necessary repairs before they turn into huge problems.

You should follow trusted furnace maintenance tips and schedule annual maintenance checks, but you can always call a professional service technician if something goes wrong during the year.

Hanover Supply Company Offers Reliable Furnace Maintenance Services

At Hanover Supply Company, we pride ourselves on our services and strive to provide the best systems available. Contact us today to find out more about furnace maintenance. Our professional technicians are licensed, bonded, and insured to give customers peace of mind when dealing with heating issues.